mardi 21 juillet 2020

Bullpup !


(ENGLISH VERSION BELOW THE FOLD)

Il y a longtemps, dans une galaxie fort éloignée, j'étais tireur. J'avais une carabine 22LR, une Stevens 300 ou quelque chose dans le genre, qui avait subi mon ingéniosité créative : je lui avais fabriqué une crosse bullpup en aluminium. J'ai retrouvé ces photos et je souhaitais les partager avec mes lecteurs, pour leur donner l'envie de bricoler. Il est important de noter que je n'ai altéré aucune pièce de l'arme pour ce montage.

Le bullpup, késako ? Il s'agit d'une crosse où la queue de détente (et donc la poignée) se trouve devant le puits de chargeur. On trouve ce type de crosse dans le Steyr AUG autrichien, le FAMAS français etc.

L'idée derrière cette crosse bullpup était de pouvoir réduire la longueur de l'arme afin que l'adjonction d'un réducteur de son ne la transforme pas en canne à pêche. L'inconvénient que j'y ai vu est que le levier d'armement est très reculé, c'est plus adapté à une carabine semi-automatique, à moins de déporter aussi ce levier, chose à laquelle j'avais songé car je voulais le mettre de l'autre côté pour toujours avoir la main forte sur la poignée pistolet. Dans le cas d'un modèle semi-auto, on peut se permettre de raccourcir encore plus la crosse, mais il faut alors disposer d'un rail "scout" qui avance beaucoup pour avancer la lunette ou le dispositif de visée. Il y a bien sûr une taille minimum légale en France pour que cela ne devienne pas une arme de poing, 45cm pour le canon et 80cm en tout, ce qui peut limiter l'intérêt de faire une telle crosse pour un modèle semi-auto.

La crosse était réglable en longueur (deux ou trois positions) et possédait une vis pour modifier la hauteur comme sur un vidéoprojecteur. J'avais même réalisé un logement pour chargeur dans la poignée pistolet, avec un dispositif de verrouillage à ressort ! On peut aussi voir un rail picatinny à l'avant avec une lampe qu'on peut actionner avec le pouce de la main faible. On peut aussi imaginer y fixer un bipied. J'avais réalisé un report de détente à l'avant grâce à un câble (que l'on peut voir sur la photo ci-dessous) qui, si mes souvenirs sont bons, actionne une lame d'acier (scie à métaux) ou un truc dans le genre.



A long time ago, in a galaxy far away, I was a shooter. I had a 22LR rifle, a Stevens 300 or something close, that fell victim of my creative ingenuity: I made an aluminum bullpup stock. I found these photos and I wanted to share them with my readers, to inspire their DIY side. It is important to note that I have not altered any part of the weapon for this assembly.

But what the heck is a bullpup stock, you might say ? This is a stock where the trigger tail (and therefore the grip) is in front of the magazine well. This type of stock is found in the Austrian Steyr AUG, the French FAMAS etc.

 The idea behind this bullpup stock was to be able to reduce the length of the weapon so that the addition of a sound suppressor does not turn it into a fishing rod. The downside that I saw is that the bolt handle is very far back, it is more suited to a semi-automatic rifle, unless you also deport this handle, something I had thought about because I wanted tp put it on the other side to always have a strong hand on the pistol grip. In the case of a semi-auto model, we can afford to shorten the butt even more, but we must then have a "scout" rail which advances a lot to advance the scope or the holosight. There is of course a legal minimum size in France so that it does not become a "handgun", 45cm for the barrel and 80cm in all, which can limit the interest of making such a stock for a semi-auto model.

The butt was adjustable in length (two or three positions) and had a screw to change the height as on a video projector. I even made a magazine housing in the pistol grip, with a spring-loaded locking device! We can also see a picatinny rail in the front with a light that can be activated with the thumb of the weak hand. We can also imagine attaching a bipod to it. I had carried out a rebound at the front thanks to a cable (which can be seen in the photo below) which, if I remember correctly, operates a steel blade (hacksaw) or something like that.